ALAT UKUR TINGGI BADAN DENGAN DETEKSI ULTRASONIC SERTA INFORMASI BERBASIS DISPLAY DAN SUARA
Abstract
The development of technology today brings us to the digital era, so it greatly affects human behaviour in their daily activities in completing their work, as most aspects of human life depend on technology, this can be marked by the increasing number of technologies used by humans in various fields, including in daily needs as a medium of information, technology was also created to facilitate and assist humans in completing various activities. Seeing the activities carried out by people today have led to digital behaviour along with the development of technology today brings us to the digital era, thus greatly affecting human behaviour in their daily activities, almost all aspects of human life are technology-based which facilitates human activities in carrying out their work, this can be indicated by the increasing number of technologies used by humans in various fields, including in the needs of daily human work. Technology was also created to facilitate and assist humans in completing various activities. So it is hoped that the existence of digital technology can make it more comfortable and easier for humans to complete their work. Human height depends on environmental and genetic factors. The average growth for each sex in the population is significantly different, with adult men being taller on average than adult women. To determine height, a measuring instrument called a height gauge is needed, which is usually expressed in units of CM or Inc. To measure height we can go to the clinic and ask the officer to do an examination, or do it yourself at home with the help of others.But sometimes, there are some urgent things that make us have to know our height immediately. Or even we are attacked by laziness when we want to do height control to the clinic.With the development of technology today, it is possible to take height measurements at home even without the help of others. So that it can make it easier for us to check our height. The output expected by the author in this research is the making of the Intellectual Property Rights (HAKI) process in the form of copyright and publishing this research in an accredited national journal and of course in implementation can be used by schools or health services].
References
A. Syaifullah, N. M. Ilmi, and P. Yuliatmojo, “Alat Pengukur Tinggi Badan dan Benda Secara Digital Menggunakan Sensor Ultrasonic SRF05 Berbasis Arduino,” Autocracy J. Otomasi, Kendali, dan Apl. Ind., vol. 4, no. 01, pp. 30–40, 2017.
D. K. Mubela and H. Sutysna, “Hubungan Panjang Jari Telunjuk Tangan (Digiti II Manus) Terhadap Tinggi Badan Pada Suku Batak Di Fakultas Kedokteran Universitas Muhammadiyah Sumatera Utara,” Sriwij. J. Med., vol. 3, no. 1, pp. 1–7, 2020.
J. R. Batubara, “Adolescent Development (Perkembangan Remaja),” Sari Pediatr., vol. 12, no. 1, p. 21, 2016.
J. Panero, Dimensi Manusia & Ruang Interior. Erlangga, 1979.
I. A. Supriyono, F. Sudarto, and M. K. Fakhri, “Pengukur Tinggi Badan Menggunakan Sensor Ultrasonik Berbasis Mikrokontroler Atmega328 Dengan Output Suara,” CCIT J., vol. 9, no. 2, pp. 148–156, 2016.
Y. H. Anis, H. S. Mangiri, and A. N. Trisetiyanto, “Pengembangan Alat Ukur Tinggi Badan Manusia Secara Otomatis dengan Arduino,” Joined J. (Journal Informatics Educ. Vol 3 No 2 Vol. 3 Nomor 2 (2020)DO - 10.31331/joined.v3i2.1416 , Dec. 2020.
M. Afdali, M. Daud, and R. Putri, “Perancangan Alat Ukur Digital untuk Tinggi dan Berat Badan dengan Output Suara berbasis Arduino UNO,” ELKOMIKA J. Tek. Energi Elektr. Tek. Telekomun. Tek. Elektron., vol. 5, no. 1, p. 106, 2018.
F. Paquin, J. Rivnay, A. Salleo, N. Stingelin, and C. Silva, “Multi-phase semicrystalline microstructures drive exciton dissociation in neat plastic semiconductors,” J. Mater. Chem. C, vol. 3, pp. 10715–10722, 2015.
F. Paquin, J. Rivnay, A. Salleo, N. Stingelin, and C. Silva, “Multi-phase semicrystalline microstructures drive exciton dissociation in neat plastic semiconductors,” J. Mater. Chem. C, vol. 3, no. 3, pp. 10715–10722, 2015.
M. Dener, “Development a New Intelligent System for Monitoring Environment Information using Wireless Sensor Networks,” Int. J. Intell. Syst. Appl. Eng., vol. 4, no. 5, pp. 237–241, 2017.
M. H. Kurniawan, S. Siswanto, and S. Sutarti, “Rancang Bangun Sistem Keamanan Sepeda Motor Dengan Sidik Jari Dan Notifikasi Panggilan Telepon Berbasis Atmega 328,” PROSISKO J. Pengemb. Ris. dan Obs. Sist. Komput., vol. 6, no. 2, pp. 152–165, 2019.
A. R. Nugraha, D. Haryanto, A. Yulianeu, and A. Sukmaindrayana, “Implementation of Fuzzy Logic for Fire Detection Systems in Buildings Based on Internet of Things,” vol. 20, no. 16, pp. 1332–1342, 2022.
O. M. Sinaulanan, Y. D. Y. Rindengan, and B. A. Sgiarso, “Perancangan Alat Ukur Kecepatan Kendaraan Menggunakan ATMega 16,” E-Journal Tek. Elektro dan Komput., vol. 02, no. 2, pp. 60–70, 2015.
M. I. Ashari and R. Setiawan, “Analisa Kendali Jarak Jauh Tata Suara Panggung Menggunakan Jaringan Radio,” in Seminar Nasional Teknologi Elektro Terapan, 2019, pp. 5–10.
Syafriyudin and D. P. Purwanto, “Oven Pengering Berbasis Mikrokontroler Atmega 8535 Menggunakan Pemanas Pada Industri Rumah Tangga,” J. Teknol., vol. 2, no. 1, pp. 70–79, 2009.
N. Wiliani and F. Ikhsan, “Implementasi Metode Gauss terhadap Perhitungan Waktu Lampu Lalu Lintas,” Incomtech, vol. 7, no. 1, pp. 13–19, 2018.
B. Thamrin, Sistem Pengamanan Kunci Sepeda Motor Menggunakan Radio Frequency Identification (RFID). Deepublish, 2015.
Y. Primianjani, M. Rusdan, and G. Yuliana, “Rancang Bangun Sistem Pemutus Aliran Listrik KWH Meter Pascabayar Berbasis Web Menggunakan Mikrokontroler,” Semnas Corisindo, vol. 1, no. 1 SE-Articles, Aug. 2021.
L. Rahmi and A. Medi, “Perancangan Alat Pemberi Makan Binatang Peliharaan Secara Otomatis,” J. Apl. Manaj. Inform. Komput., vol. 1, no. 1, pp. 1–12, 2021.
L. Maulana and D. Yendri, “Rancang Bangun Alat Ukur Tinggi dan Berat Badan Ideal Berdasarkan Metode Brocha Berbasis Mikrokontroler,” J. Inf. Technol. Comput. Eng., vol. 2, no. 02, pp. 76–84, 2018.
R. Rinaldy, R. F. Christianti, and D. Supriyadi, “Pengendalian Motor Servo Yang Terintegrasi Dengan Webcam Berbasis Internet Dan Arduino,” J. INFOTEL - Inform. Telekomun. Elektron., vol. 5, no. 2, p. 17, 2013.
Suherman, I. Andriyanto, and S. Dwiyatno, “Rancang Bangun Alat Ukur Temperatur Suhu Perangkat Server Menggunakan Sensor Lm35 Bebasis Sms Gateway,” Prosisko, vol. 2, no. 1, pp. 42–63, 2015.
N. Lestari, “Pemanfaatan Jaringan Wireless Sebagai Pengendali Robot Penyiram,” J. Tek. Inform. Politek. Sekayu, vol. 5, no. 2, pp. 41–54, 2016.
S. Al-Youif, M. A. M. Ali, and M. N. Mohammed, “Alcohol detection for car locking system,” in 2018 IEEE Symposium on Computer Applications & Industrial Electronics (ISCAIE), 2018, pp. 230–233.
K. C. Meje, L. Bokopane, K. Kusakana, and M. Siti, “Real-time power dispatch in a standalone hybrid multisource distributed energy system using an Arduino board,” Energy Reports, vol. 7, pp. 479–486, 2021.
B. Wicaksana, K. Baru, and J. Selatan, “Rancang Bangun Purwarupa Gerbang Otomatis Menggunakan Bluetooth HC-05 Dengan Sensor Ultrasonic Berbasis Mikrokontroler Arduino Uno R3,” J. Ilm. Komputasi, vol. 18, no. 2, 2019.
B. Bahadur, “Liquid Crystal Displays,” Mol. Cryst. Liq. Cryst., vol. 109, no. 1, pp. 3–93, Aug. 1984. …........
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Jurnal Komunikasi
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
